COMPUTER KNOWLEDGE FOR BANK EXAMS

1. Buffer is device/storage area–
1. Where data are temporarily stored
2. Where data is permanently stored
3. Where data error occurs
4. All of the above
5. None of these

2. A network geometric arrangement in which a single connecting line is shared by a number of nodes is called–
1. Car Topology
2. Bus Topology
3. Truck Topology
4. All of the above
5. None of these

3. An error in a computer program is referred as–
1. Bug
2. Bit
3. Virus
4. All of the above
5. None of these

4. Circuits that provide a communication path between two or more devices of a digital computer system is–
1. Car
2. Bus
3. Truck
4. All of the above
5. None of these

5. A fixed number of adjacent bits that represent a particular character or symbol are referred as–
1. Byte
2. Octal
3. Bubble
4. All of the above
5. None of these

6. Cache memory is a–
1. Small buffer storage
2. Permanent storage
3. Main memory
4. All of the above
5. None of these

7. The total number of digits (symbols) available to represent numbers in a positional number system is referred as–
1. Number system
2. Base
3. Power
4. All of the above
5. None of these

8. Cache memory is–
1. Smaller and faster than main storage
2. Bigger and slower than main storage
3. Smaller but slower than main memory
4. Bigger and faster than main memory
5. None of these

9. Cache memory–
1. Is a Static RAM
2. Increases the speed of processing by making current programs and data available to the CPU at a rapid rate
3. Both 1. and 2. are true .
4. Both 1. and 2. are false
5. None of these

10. Following is false for BASIC–
1. Beginners All-Purpose Symbolic Instruction Code
2. High-level interactive programming language
3. Works in time sharing environment
4. Low level object oriented language
5. None of these

11. A unit for measuring data transmission speed that describes the capacity of a carrier is referred as–
1. Baud
2. Bit
3. Bond
4. All of the above
5. Batch

12. A process of trying out a new product by independent users before it is finally manufactured/developed–
1. Alpha test
2. Beta Test
3. Gamma test
4. All of the above
5. None of these

13. A selection, choice, or condition involving two possibilities is referred as–
1. Unary
2. Binary
3. Octal
4. All of the above
5. None of these

14. Base band System is–
1. A networking system
2. Where the channel support a single digital signal
3. Both 1. and 2. are true
4. All of the above
5. None is true

15. One of the early coding systems, based on the idea of converting each digit of a decimal number into its binary equivalent rather than converting the entire decimal value into a pure binary form is–
1. ASCII code
2. BCD
3. ASCII-8
4. All of the above
5. None of these

16. In Batch processing–
1. Several computer programs runs one after another without human interaction to run each program individually
2. Several computer programs runs one after another with human interaction to run each program individually
3. Selected computer programs runs one after another with human interaction to run each program individually
4. All of the above
5. None is true

17. BISYNC is–
1. Binary synchronous
2. A process of transmitting data
3. A half-duplex, character oriented, synchronous data communication transmission method
4. All of the above
5. None of these

18. A device that is used to transmit data from one location to another is referred as–
1. Storage
2. Memory
3. Carrier
4. All of the above
5. None of these

19. Programs developed by an outside supplier and provided to the user in a machine readable form is known as–
1. Canned programs
2. Beta program
3. Alpha program
4. All of the above
5. None of these

20. A binary numbers are represented by–
1. Digits 0 and 1
2. Digits 0, 1, ..., 8
3. Digits AB, C,...
4. All of the above
5. None of these

21. BIOS is responsible for
1. Handling the particulars of input/output operations
2. Output operations
3. Input operations
4. All of the above
5. None of these

22. BIOS is an abbreviation for–
1. Basic Input/Basic Output
2. Binary synchronous
3. Binary digit
4. All of the above
5. None of these

23. BISYNC is an abbreviation for–
1. Binary Input/Binary Output
2. Binary synchronous
3. Binary digit
4. All of the above
5. None of these

24. The overall design, construction, organiz-ation and interconnecting of the various components of a computer system is referred as–
1. Computer Architecture
2. Computer Flowchart
3. Computer Algorithm
4. All of the above
5. None of these

25. A number system with a base of two is referred as–
1. Unary number system
2. Binary number system
3. Octal number system
4. All of the above
5. None of these

Answers:

1. (1) 2. (2) 3. (1) 4. (2) 5. (1) 6. (1) 7. (2) 8. (1) 9. (3) 10. (4) 11. (1) 12. (2) 13. (2) 14. (3) 15. (2) 16. (1) 17. (4) 18. (3) 19. (1) 20. (1) 21. (1) 22. (1) 23. (2) 24. (1) 25. (2)

COMPUTER KNOWLEDGE FOR BANK EXAMS

1. A digital communication system capable of interconnecting, a large number of computers, terminals and other peripheral devices within a limited geographical area is called–
1. LAN
2. WAN
3. Internet
4. All of the above
5. None of these

2. A secondary storage device that uses a long plastic strip coated with a magnetic material as a recording medium is–
1. Magnetic tape
2. Compact disk
3. Hard disk
4. All of the above
5. None of these

3. An E-mail protocol for storage, manage-ment and change, especially in corporate offices–
1. Message handling service
2. Postal service’s
3. Data storage
4. All of the above
5. None of these


4. Which of the following is an advantage of stored programs?
1. Reliability
2. Reduction in operation costs
3. The computers becoming general-purpose
4. All of the above
5. None of these

5. Which of the following is not true for primary storage?
1. It is a part of the CPU
2. It allows very fast access of data
3. It is relatively more expensive then other storage devices.
4. Can be removed and transported.
5. All of the above

6. Function of control unit in the CPU is–
1. To decode program instructions
2. To transfer data to primary storage
3. To perform logical operations
4. To store program instructions
5. All of the above

7. Electronic spreadsheets are useful in situation where relatively .......... data must be input
1. Small
2. Large
3. No
4. All of the above
5. None is true

8. A list of options from which a program user can select anyone in order to perform a desired action is referred as–
1. Menu
2. Index
3. Directory
4. All of the above
5. None of these

9. A method whereby messages to be transmitted between computers are all sent to a central computer, which gathers them and routes them to the appropriate destination(s) is known as–
1. Message switching
2. Message delete
3. Message accept
4. All of the above
5. None of these

10. Which of the following describe one or more characteristics of a modem computer?
1. An electronic device
2. A mechanical device
3. A electro-mechanical device
4. All of the above
5. None of these

11. Combining records from two or more ordered files into a single ordered file is called–
1. Menu
2. Merging
3. Taking
4. All of the above
5. None of these

12. The ascending order of a data hierarchy is
1. Bit-byte-record-field-file-database
2. Byte-bit-field-record-file-database
3. Byte-bit-record-file-field-database
4. Bit-byte-field-record-file-database
5. All of the above

13. A LSI chip contains the entire CPU of computer except main memory is called–
1. Microprocessor
2. Hard disk
3. Input device
4. Output device
5. All of the above

14. A storage medium that loses its contents in the event of power failure is called–
1. Volatile storage
2. Non volatile storage
3. Permanent storage
4. All of the above
5. None of these

15. One-millionth of a second is referred as–
1. Microsecond
2. Millisecond
3. Hour
4. Minute
5. All of the above

16. Alternate facilities of programs, data files, hardware equipments, etc. used in case the original one is destroyed, lost, or fail to operate is–
1. Backup
2. Forehead
3. Delete
4. All of the above
5. None of these

17. One-thousandth of a second is called–
1. Microsecond
2. Millisecond
3. Hour 4. Minute
5. All of the above

18. The CPU (central processing unit) consists of
1. Input, output, and processing
2. Control unit, primary storage, and secondary storage
3. Control unit, arithmetic-logic unit, and primary storage
4. All of the above
5. None of these

19. The product of data processing is–
1. Data
2. Information
3. Software
4. Computer
5. All of the above

20. The input device used by computer is–
1. Motherboard
2. Central processing unit
3. Keyboard
4. System unit
5. All of the above

21. The structure of interconnecting of nodes of
a computer network is referred as–
1. Network topology 2. Internet
3. Local Area Network
4. Wide Area Network
5. All of the above

22. Nible is–
1. Double of byte
2. Half of byte
3. Ten times of byte
4. Five times of byte
5. All of the above

23. Multiprogramming is the–
1. The inter-leaved execution of two or more different and independent programs by the same computer
2. The execution of single by the different computers
3. The inter-leaved execution of two or more different and independent programs by the different computers
4. All of the above
5. None of these

24. A facility available in an operating system that allows multiple functions from the same application package is referred as–
1. Multi-threading
2. Multi-programming
3. Multi-processing
4. All of the above
5. None of these

25. Narrowband channel is a communication channels–
1. That handle low volumes of data
2. Used mainly for telegraph lines and low
speed terminals
3. Both 1. and 2.
4. All of the above
5. None of these

26. Following is the example of Network–
1. LAN
2. WAN
3. Internet
4. All the above
5. None of these

27. Peer-to-peer is a description–
1. Of communications between two dissimilar devices
2. Of communications between two equal devices
3. Of communications between two different devices
4. All of the above
5. None of these

 28. Non-document files are–
1. Pure ASCII files that can be listed for any word processing software
2. Non ASCII files that can be listed for any word processing software
3. Pure ASCII files that can be listed for specific word processing software
4. Non ASCII files that can be listed for pecific word processing software
5. All of the above

29. The method of dividing a physical channel into many logical channels so that a number of independent signals may be simultaneously transmitted on it is referred as–
1. Multithreading
2. Multiprocessing
3. Multiplexing
4. All of the above
5. None of these

30. An interconnected computer configura-tions or computers with two or more independent CPUs that have the ability to simultaneously execute several programs is called–
1. Multithreading
2. Multiprocessing
3. Multiplexing
4. All of the above
5. None of these

31. Following is not a non-impact printer–
1. Thermal printer
2. Ink-jet printer
3. Laser printer
4. Dot-matrix printer
5. All of the above

32. A number system with a base of 8 is referred as–
1. Binary
2. Decimal
3. Octal
4. All of the above
5. None of these

33. Devices converts digital signals to Sine waves at the sending end and back to digital signals at the receiving end is called–
1. Modem
2. Telephone
3. Mobile phone
4. All of the above
5. None of these

34. Dividing a project into segments and smaller units in order to simplify the analysis, design and programming effort is referred as–
1. Monitoring
2. Modular approach
3. Microprocessing
4. All of the above
5. None of these

35. The technique where digital signals are converted to its analog form for transmission over an analog facility is called–
1. Modulation
2. Digitization
3. Multiprocessing
4. All of the above
5. None of these

36. Multiprocessor is a computer system–
1. Where many CPU under a common control
2. Consisting of more than one input devices under common control
3. Where many output devices under
4. All of the above
5. None of these

37. The point at which the flow of text in a document moves to the top of a new page–
1. Page break
2. Page insert
3. Page format
4. All of the above
5. None of these

38. Technique to implement virtual memory where memory is divided into units of fixed size memory is–
1. Paging
2. De-fragments
3. Segmentation
4. All of the above
5. None of these

39. An adder where all the bits of the two operands are added simultaneously–
1. Parallel adder
2. Half adder
3. Full adder
4. All of the above
5. None of these

40. An extra bit added to a string of bits that enables the computer to detect internal errors in the transmission of binary data–
1. Parity bit
2. Byte
3. Nibble
4. All of the above
5. None of these

41. Password is–
1. Code by which a user gains access to a computer system
2. Pass for viewing movie
3. Entrance without paying something
4. All of the above
5. None of these

42. PL 1 (Programming Language One) is–
1. High level programming language
2. Low level programming language
3. Machine language
4. Assembly language
5. All of the above

43. Pascal is–
1. A high-level programming language
2. Named after Blaise Pascal
3. Named after mathematician that facilitates structured programming techniques
4. All of the above
5. None of these

44. Storage device where time to retrieve stored information is independent of address where it is stored is called–
1. Random access memory (RAM)
2. Primary memory
3. Secondary memory
4. All of the above
5. None of these

45. Octal number system has a base–
1. Two
2. Four
3. Eight
4. Ten
5. All of the above

46. Since input and output devices are on the edge of the main processing therefore they are referred as–
1. Peripheral devices
2. Processing devices
3. Personal devices
4. All of the above
5. None of these

47. A system changeover method where complete changeover to the new system takes place incrementally over a period of time is referred as–
1. Phased replacement
2. Block replacement
3. Complete replacement
4. All of the above
5. None of these

48. One trillionth of a second is–
1. Pico second
2. Mille second
3. Micro second
4. Minute
5. All of these

49. Following is of Non-vo a storage device
1. Magnetic tape
2. Compact disk
3. Floppy disk
4. All of the above
5. None of these

50. A storage medium that retains its contents even in the absence of power is referred as–
1. Non-volatile storage
2. Volatile storage
3. Secondary storage
4. Primary storage
5. None of these

ANSWERS:

1. (1) 2. (1) 3. (1) 4. (1) 5. (1) 6. (4) 7. (1) 8. (2) 9. (1) 10. (1)
11. (1) 12. (2) 13. (4) 14. (1) 15. (1) 16. (1) 17. (1) 18. (2) 19. (3) 20. (2)
21. (3) 22. (1) 23. (2) 24. (1) 25. (1) 26. (4) 27. (4) 28. (2) 29. (1) 30. (3)
31. (2) 32. (3) 33. (3) 34. (1) 35. (2) 36. (1) 37. (1) 38. (1) 39. (1) 40. (1)
41. (1) 42. (1) 43. (1) 44. (4) 45. (3) 46. (3) 47. (1) 48. (1) 49. (1) 50. (4)